What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Upvotes:

I can't stop thinking about this plotline in 'Materialists' - NPR

2024–10–10[John johnson John Johnson ]

Here is a simplified AC power diagram.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Inside the Spectacular Downfall of UnitedHealth and Its CEO - WSJ

A circuit breaker is similar, but is resettable.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

He then describes Rainy Season and Lightning.

What are my 10 favorite rock record album opening tracks?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Now when you have a certain ac resistance, then a current flows in a loop.

What is lightning?

Scientists discover giant underground sponge capable of supplying water to rivers and cities - Earth.com

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

(Dc diagram shown, AC is similar).

Has anyone shared his wife with a friend? How was it?

He then describes the function of a fuse.

what exactly is a ‘surge’ protector?

This is where this question deviates from being a 'generic' question, and becomes more specific.

Is Twilight appropriate for a 12-year-old?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Aryna Sabalenka Releases Statement Amid Backlash Over Coco Gauff Comments - Sports Illustrated

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

The other is “what does a “fuse” do?”

Barnstars:

Why do so many men wait until they are retired or close to it to start having sex with Men? Most of them say they have always wanted to suck dick or be fucked. Why did you wait?

But… the neutral is now “floating” because of the 1 ohm resistance.

There are three different concepts here that are getting confused.

This one hit behind the barn.

Nemo harum distinctio cupiditate soluta nesciunt beatae harum.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

2024–10–14 [Omar Gharbi Omar Gharbi ]

It seems Mohan does not understand the difference between a comment and an Answer.

Incredible auroras delight stargazers in New Zealand photo of the day for June 2, 2025 - Space

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

A fuse is a non-resetable over current circuit protector.

The third is lightning and “how it gets conducted into a home.”

These are simplified answers to the original question, and does not change anything I wrote above.

One is “what exactly is in a ‘surge protector’ ? ”

nine

What does a fuse do?

but I think this circuit , shows a few more pieces.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

At least they know the answer if they wanted it.

So, the voltage could go up to 500 volts, and the fuse will not open up.

This is where the MOV conducts again, and dissipated the energy.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

An AC voltage/ current source, and an ac inductive load.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

In schematic diagrams this is the symbol for a fuse:

But it can get overloaded, and no longer works.

These devices are installed between the “hot” and “neutral” and protective ground.

Edit 2024–10.

but this device (an Inductor) … impedes the rapid changes in the current.

2024–10–16 [ OO OLAOYE OYEBODE ]

It also is a device that limits the change in current flow.

At one ohm, the resistor has a maximum of 1 watt power.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

For this case there are devices called Metal oxide varistors (MOV).

First Sentence:

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

I post the exact comment here.

a photo is worth a thousand words.

[old diagram got deleted by accident]

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Because the load is inductive, the current lags the voltage.(by a bit).

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

He then asserts :

the problem then depends on "how fast does the fuse operate?".

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

This is 'the assistant's answer'

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

This device then solves the entire problem.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

so, what happens?

The bolt then partially travels down the line to your home.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

There are two important concepts here.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

One

[image of Common-mode choke]

eight

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.